Replace Lock in UPVC Door
A professional locksmith should be contacted if your upvc window lock mechanism replacement door locks are not working properly. They are quick, efficient and finish the job to a high standard.
The process of changing a barrel lock made of upvc isn’t that difficult to do. You only need to know the procedure and follow the steps below.
Removal of the Barrel Lock
Upvc windows and doors are typical in all kinds of properties. They are excellent for letting natural light into the home and are easy to open using the right key. The process of changing the barrel on the uPVC door is a straightforward task that can be completed in just five minutes. It’s a quick fix if you have lost your keys, a tenant has left and has not returned it, or the barrel of the lock is damaged.
You will need to remove the screws that hold the handles first. This is to get the handles removed from the way so that you can access the window lock repairs barrel screw. Be careful not to loosen the screws too much as this could damage the handles or cause them to fall off while you’re working.
After the screws have been removed, look for the screw that holds the barrel lock in place on the inside of your door. This screw is distinct in color to the other screws on your door and stands out. Take it off using a Phillips screwdriver. Then, grab the present key used to open the lock and place it into the barrel. Turn it to the right as far as you can. This will let the barrel go and make it easier to remove the door.
After you’ve loosen the screw and you’re ready to break the support pins that hold the euro cylinder in place. You’ll require pliers with strength or mole grips do this. Grab the protruding part of the euro cylinder, and bend it from side to the side and upwards and downwards. This will break the support pins that hold it in place.
The process of installing the new cylinder could be completed after the previous one was removed. The first step is to measure the size of the lock cylinder to ensure that you have purchased the right replacement. This can be done by measuring the distance from the center of the circular portion of the keyhole to the center of the square spindle. The measurement should be taken from the upper spindle.
Change the Cylinder
The euro cylinder is the primary locking mechanism for the door made of upvc. It is simple to replace and doesn’t require a locksmith or handyman. If yours does not have this security feature, you must replace it with one that does. They aren’t expensive and could save you money and hassle in the case that your locks have been compromised.
Open the door and stand in the front of it. This will allow you to easily reach the screw that holds the handle with your hand or the appropriate tool. Loosen this a little, maybe just one quarter turn to get the job started.
After this is completed, the cylinder should come out easily since it is no longer secured by the screw. The next step is to decide on the size of replacement cylinder that you need. There are about 25 sizes available. It is a good idea to bring your old cylinder along when you buy a new one so that you can be sure it will fit.
If you’re unsure of the size, measure from the screw hole center to the end of cylinder. This is the only way to make sure you’re getting the correct sized cylinder for your upvc doors.
Insert the new cylinder into your door in the opposite direction you removed the old one. It could be difficult to align the lock cam but it is usually an issue with alignment and will eventually be sorted out.
Now you will need to screw in the long securing screws. Once this is done you can test the new cylinder to ensure it is secured inside the door. If you are happy that it is, you can then reattach the handle and close the door for another test. If everything is functioning properly your cylinder lock on your door made of upvc has been replaced and you have added a layer of security for your home.
Change the handle
There are many reasons why a door knob could become loose. It could be due to wear and tear on the handle itself, or it can be caused by the square spindle in the handle becoming worn or loose from the force or use. In this scenario, the door handle will have to be replaced.
It is crucial that the door be opened so that it will not close between removing the handle and replacing it. Remove the screws from the inner surface of the handle plate using a screwdriver. This will remove the handle from the plate. Do not lose these screws, as you may have to replace window locks them later.
When the handles are taken off, you will be able to access the cylinder lock that is inside the door. The lock will be a circular or bulb-shaped cylinder. It is only found in multi-point locks used on upvc doors as well as aluminium doors. The procedure for changing the cylinder is similar to the process of changing the handle but you’ll need to take the old cylinder from the door and replace it with a brand new one.
When selecting the replacement handle, it is crucial to take into consideration the size. Make sure the handle you choose is identical in size to the original one as it will have to be able to be able to fit over the screws that hold the handle in place. A good place to start is by using a size matrix which will list the most common sizes of replacement handles along with their keyhole center to handle plate distance.
It is also worth considering upgrading your handles on your doors made of upvc to higher security standards like the Sold Secure SS301 or a 2* Kitemark set of security handles. This will increase the security of your house and make it easier to operate your door. These sets are a bit more expensive however the increased security and peace of mind is worth it. To constantly push the handle of the door upwards and downwards to shut or open it is not something you want to be doing.
Change the Lock
The lock on your door made of uPVC could be a weak point for thieves. It is possible to upgrade your Upvc Window lock replacement door with a multipoint lock to increase the security. This will include an open hook and a deadbolt to keep out burglars. A professional locksmith can assist you with this, but it is also possible to do the work yourself. The process is fast and simple. You’ll need some basic tools.
The first step is to loosen the screws that hold in the handle. By using a screwdriver you can take the screws off and put them in a safe spot. Then, you can lift the handle and reveal the screw that holds the cylinder in position. This screw can be unscrewed and replaced with a brand new one. Make sure the screw is of the same size as the one you used before. It must align properly with the lock barrel.
The process of changing the lock on your uPVC can be intimidating. It is vital to the security of your home. If you make mistakes, it may make it impossible to open the door. If you are able to figure it out, it’s relatively easy and costs less than calling an expert locksmith.
You’ll need to remove the inner faceplate from the lock in order to replace the lock. You must be able to see the screw that is located inside the door as well as the retaining bolt on the outside of the door. Once you have these screws in your hands, you can remove and replace the faceplate.
There are many reasons you may have to change the lock on your uPVC doors. You may need to change the lock on your uPVC doors for various reasons.
Changing a uPVC lock can be accomplished by anyone with basic DIY skills. If the lock is stuck, you’ll need to check the hinges within the mechanism. If the hinges are lubricated it is a simple repair. If you’re not sure that it will be a simple fix, seek out a professional.