Choosing Replacement UPVC Window Handles
If your uPVC window handle is damaged or worn, it’s important to choose the right replacement. This will ensure the security of your home.
When selecting a handle replacement for your double-glazed windows, there are several factors to consider. First, you must identify the type handle you have.
Cockspur handle
It is easy to replace the handle on your uPVC windows when they break. It is important to determine the kind of lock and handle you are using so that you can purchase the correct replacement for it. You also need to weigh the spindle inside your handle that will help you determine the size of the new one you need.
Espag handles are the most commonly used uPVC handles. They feature a central spindle that slots into your window’s locking mechanism. This handle is found on both older and modern uPVC Windows. To install a new handle, you’ll have to take off your existing handle. This requires removing pins and grub screws, based on what kind of handle you have.
Cockspur handles are another type of uPVC handle. They feature an opening that closes on a wedge-shaped window frame block. This handle is usually found on older upvc wooden window handles window frames and is less secure than the Espag handle. When replacing a Cockspur, you should take into account the height of the step to ensure that the replacement is of the proper size.
The second type is the inline Espagnolette, which has straight lines and is suitable for windows that tilt and turn. The most commonly used handle is the “Espag” type with a 38mm gap between the centres and can be used on tilt and turn window handles and turn windows or as an internal door handle. The Espag handle is available in a variety of nibs and height options to fit various applications. Some styles of Espag handles have an internal lock mechanism, that can add additional security for your home. This is an excellent option for homeowners looking to increase the security of their windows, but do not wish to invest in a multi-point lock. The lock mechanism in the Espag handle is controlled by the rod of a shoot bolt that is attached to a locking gearbox, which provides supreme security.
Espag handle
The Espag handle, also referred as the espagnolette window handle is an essential part of your double-glazing system. It can help you protect your home. The multipoint window handles locking system comes with shoot bolt rods with a lock gearbox, and offers the highest level of security. The handle has an internal spindle which controls the mechanism. It can be installed on uPVC, timber or aluminum windows. It is available in different styles and is able to be locked or non-locking locked depending on your preferences.
The handle is typically attached to the frame with pins or screws. Identify these and remove them using the help of pliers or a screwdriver. Then find the spindle on the back of the handle and slide it into the lock mechanism within the window. Once you have the handle in place, screw it into the frame and replace any screws or pins that were removed from the previous handle.
It is essential to accurately measure the spindle and determine the handle type during the replacement process. This information will allow you to choose the appropriate replacement handle. If the new handle you choose is tilt and turn window handles and turn, you’ll be required to ensure that the spindle of the handle is long enough to work the tilt and turning mechanisms.
You can easily replace uPVC window handle yourself once you have the appropriate tools and a thorough understanding of the type. Make sure you take your time and prioritize safety when working with windows and tools. You should also test your window handle to ensure that it is functioning correctly before you secure it in place. A good way to do this is to open and closing the window a few times. If the window is difficult to open or close, it may need additional tightening. You should also check for signs of wear that could cause the handle to snap. These tips will help you replace your uPVC handles and increase the security of your home.
Tilt and Turn Handle
If a uPVC window handle has broken or not working properly the handle can be repaired in a few simple steps. It is essential to determine the type of handle, and then measure the spindle’s size. Different handles come in different sizes. This job can be made simpler by using the right tools and allowing your own time. Additionally, it’s crucial to remember to make sure you are safe when working with windows and other tools.
Identifying the type of handle is accomplished by looking at the base of the handle. There typically an anchor or screw in the base that holds the handle to the frame. If it is not there it could mean that the handle has split from the base section and should be replaced. It is also important to keep in mind that the handle has to be designed for the type of window it is fitted to. This is essential because different handles are available for awning and casement windows. There are also different versions in each type of handle.
To replace a uPVC window handle, first take out the handle that was previously in the window. Then, look for screws above or below the handle, and make use of a screwdriver for taking them out. If there aren’t any screws, use your fingers to remove the handle from the window. Check that the pins or screws are secure and tightened after removal of the handle. Replace the handle and screw it into place. It is a good practice to replace the caps on screws and then test the handle after it has been repaired.
Selecting the correct replacement handle for your upvc window is essential to ensure that it fits your window in the right way. It is also a great idea to choose the handle that is in line with your window’s colour. This will give your room a modern look, and improve its appearance. It’s also a good idea to get an item with a lock so that you can lock it when the window is closed.
Crank handle
uPVC Windows are susceptible to wear and tear over time. They provide insulation and security for your home. The handle mechanism that is used to open and close the window can also break and require replacement. It is good to know that replacing the old uPVC window handles is a fairly easy task that can be undertaken by anyone with the appropriate tools. It is crucial to identify the type of lock and window handle before you attempt to replace it, as different models require different techniques.
Ensure the new UPVC window handle has the correct spindle length. This is the part of the handle that fits into the frame of the window and connects to the locking mechanism. This can be determined by taking the handle off and measuring it from its base to its tip. The handle’s spindle should be exactly the same length as the screw or pin that holds it to the window.
Remove the handle by unscrewing its oval plastic bit. Then, take off the square metal bar inside the window that slots into the handle’s square drive inside. The screws that attach the handle to the frame of the window will be revealed. They can be removed with the flat-head screwdriver. Once these are removed then you can replace the cockspur wedge block and grub screw, then insert the handle.
It is possible that the handle is loose due to the handle not being aligned properly. The window handle is typically secured with an anchor or screw in the back of the handle that is inserted into the handle. Then, it is fixed with another screw or pin in the front of the handle. This screw is hidden when the window is closed position, and is only accessible by opening the handle.
After installing the new upvc tilt and turn window handles window handle, it is important to tighten the screws to prevent them from loosing over time. It is also crucial to regularly inspect the window handle and lock for signs of wear and to lubricate them on a regular basis. Keeping your windows and handles in good condition will allow them to function properly and look beautiful for many years to come.