replacing double glazed window handle (writes in the official Werite blog)
Replacing a double-glazed windows handle is fairly simple provided you follow the right steps. Firstly, you need to identify what kind of handle is in use and then determine the spindle’s diameter.
Cockspur handles are still used in older upvc window handle repair windows, however they have a different height of step as compared to aluminum counterparts (also called spade handles). This means they need a spindle that is longer.
Measure the Spindle
When replacing a handle on double-glazed windows, it is crucial to measure the spindle in order to ensure that you receive the correct replacement. Spindle length is the distance the handle extends from the base plate, or how deep it is into the lock. It varies from handle to handle. When measuring the spindle length it is crucial that the handle used previously has not been removed as you may be unable to get a good reading if this is the case.
In general you can expect that a new handle will come with the spindle that fits into it. However, the size of the spindle will differ between different manufacturers and handles, so it is advisable to verify when purchasing one. To save time and energy, it’s a good idea to purchase the spindle and handle together.
Espag handles are the most popular kind of handle in uPVC window frames. They operate a hidden locking mechanism that allows you to shut and open the windows. They are available in a variety of designs and colors to fit your home. When choosing an new Espag handle, you need to be aware of the length of the spindle as this can contribute to the security of your window.
The handles can be turned to the left or right depending on your preference. They are also available in a variety of sizes to fit into a wide variety of frames. They are a simple and efficient option for your double glazed window.
Another popular type of handle is the tilt and turn window handle. These handles are usually large and sturdy, since they lock in two places when opening the windows. They are available in a range of finishes including chrome, stainless steel and brass, as well as white uPVC to match your existing ironmongery.
The Cockspur handle is more of a traditional window handle with an elongated spur that presses against the frame’s wedge. They are a simple and effective option for a double-glazed window and are available in a broad variety of nib and nose sizes to accommodate a broad range of profiles.
Take the handle off
There are several different types of double-glazed window handles that can be fitted to uPVC windows. Espag handles are the most popular one, since they have a spinning mechanism through them that engages with the locking mechanisms of the window frame. Other handles include tilt-and turn handles that let you tilt the window to let in air or turn it completely open. They are typically heavier and usually have more complicated mechanisms, but they also offer greater security. Certain styles of handles are compatible with key locks, bringing additional security to your home.
It is essential to examine the handle before you replace it. This will help you determine whether a brand new handle or an existing one only requires tightening, or if it is time for a replacement. If the handle is broken then it needs to be replaced completely.
If the handle seems to be loose, then it may require tightening or retightened. With a screwdriver, locate the screws within the handle and take them out. Make sure that you don’t use a power tool because this could damage the window handles and stays frame or the handle. After the screws are removed, they can be placed in a safe location.
After the handle has been removed from the window frame, you are able to take off the handle and replace it with a brand new one. Begin by aligning your new handle with the holes in the window frame. When you are satisfied that they are aligned place the new handle and screw it into place.
After you are done testing your newly-installed window handle by opening and closing the window several times to verify that it works correctly. The screw should be tightened in the event of any wobbling or looseness. This could cause the handle to become unstable, and it may even be able to fall off.
We have a variety of replacement window handles in a variety of colours such as black, white and brass. We have espag, inline, cranked and tilt and turn handles for all types of upvc window handles of uPVC or timber windows. We also offer slimline handles that can be tailored to your needs. This is ideal if you are concerned about space.
Remove the Screws
The screws of a window handle are usually covered with plastic screws that you’ll have to remove before installing the new handles. They can be removed using an screwdriver, or perhaps your fingernail. They are usually located below and above the handle in its open position. Make sure that you do not damage any of the screws when removing them. If possible keep the caps in case they are required later in the installation process.
Based on the requirements you have depending on your needs, there are a range of options for the handle type that you replace. If you’re looking for something more sleek than the standard handle, slimline models might be the best for you. These are designed to accommodate the same spindle size as standard handles, however they are smaller and won’t interfere with blinds or shutters. There are also chrome, stainless steel, and brass options available which can complement the other ironmongery in your home.
After you have removed the handle, you can begin making your replacement. Before you decide on a replacement, you will need to determine the type of handle that you own and measure its spindle length. You will need to make sure that the new handle is suitable size for your uPVC windows and that the screw holes are aligned with your existing holes.
You’ll need to make sure that the handle is in an open position and that the spindle has been properly placed before installing it. Then, line up the fixing holes in the handle with the hole in the window and put the pins or screws in. Be careful not to tighten too much them, as this may cause the window frame to crack.
You will have to test the handle by locking and unlocking the window. It is recommended to do this several time to ensure that the window lock works and to see if there are any problems. If you are satisfied with the performance of your new window handle, you can replace the screw caps and put the cover back on.
Install the new handle
A uPVC window handle is typically designed to last for many years but it is also possible to become damaged and require replacement. If the handle is loose because of a pin or screw that is loose or has broken window handle repair off entirely from the base section of the window, it is essential that you identify the cause of the damage before you decide on the best method of repair window handle.
In the majority of instances, a loose window handle needs to be tightened before it can be fixed. This involves removal of the handle and then locating the fixing screws that secure it. These screws are typically hidden on the inside of the handle. However, they can easily be located with the help of a screwdriver. Once they are removed, you can then separate the spindle from the handle.
After you have removed the handle, you can replace it with the new one. This is a simple process, but it does require careful attention to ensure that the screws are securely in place. The handle must be properly positioned and locked in place to ensure that it will not be removed in the future.
Depending on the kind of window you have, there are several different types of handles that you can use. Cockspur handles are available, as are tilt and turn handles and Espag locks. Each comes with its own unique features, so it is important to make sure that you select the right handle for your window.
If you are replacing the handle of a Cadenza handle, for instance it is essential to make sure that you have the same handle in terms of blade design and fixing centres. If you are using an blade handle that is angled when a flat blade is to be used, the blade will break.
In general replacing a double glazed window handle is a relatively easy process. However, it is important to keep in mind that there are different sizes and styles of uPVC window handles, so it is vital to determine the size of the spindle prior buying the replacement handle. If you follow the steps above, you should be able install an appropriate replacement handle in a short time.