uPVC is a great option for modern homes. They are durable, long-lasting and easy to maintain. As opposed to aluminium and timber they do not rust or rot.
It is essential to clean and oil UPVC doors and windows regularly. This will help avoid unnecessary repair doors costs as well as improve the efficiency of energy.
1. Broken Glass
The broken glass in your windows can cause significant damage to your home, and could even be fatal. You should take the time to ensure that your windows are in good shape.
For single pane windows, it is fairly easy to replace them, and the replacement will usually fit inside the frame of the previous one easily. However, if you have double pane windows that are secured by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this instance you’ll need source some plastic spacers that will assist the new pane to fit correctly into the window frame.
Wearing eye protection and heavy gloves is essential if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth before you start working on the glass so that any fragments of glass fall onto the cloth instead of landing on the floor, where they could be trampled on and cause further damage.
Once the glass has been removed and the glass is removed, it’s a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from entering the home until a professional is able to come out and repair upvc door the window. This will also act as a barrier, deterring any intruders from getting access into your home. If the gap between the window and the door is large, you might want to use security screens that includes windows. This will provide the best of both.
2. Sagging
Upvc is a long-lasting, energy-efficient and affordable alternative to timber sash window. Over time, they can be affected by a variety of issues such as sliding. A sagging uPVC window can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to prevent the problem from becoming worse.
Repositioning the hinges could aid in fixing a window that is sagging. To accomplish this, you’ll need to open the window to access the frame. With a screwdriver, you can take off the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you’ve adjusted the hinges, shut your window and verify the fit. If you’re satisfied with the size of the window, tighten the screws to secure them in the right position.
If you are unable to reposition the hinges, you might require replacing the seal. As time passes, rubber seals lose their elasticity and become dry which causes their tightness to decrease. If this happens, it’s crucial to replace the seal as quickly as possible to ensure your uPVC windows are waterproof and safe from drafts.
uPVC handles could also become loose. This is usually due to screws that have become undone over time, but it could be due to the mechanism of the handle wearing out. Luckily, it’s not difficult to repair the loose uPVC local window repair handle yourself. You’ll first need to close the window and perform an experiment fitting. The joints at the corners of the sash must align with the joint on the casing. If it isn’t, you can make use of a screwdriver to loosen the handle and turn the mechanism back into its original position.
3. Water Leaks
If you awake to wet floors and mouldy walls every time it rains it’s crucial to take action. The leaks of water from windows do not only lead to the degrading of the structure of your home but also undermine your efforts to control the temperature within your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or not present.
This is a relatively easy fix and should be undertaken by any competent DIYer. Based on the severity of the problem the old caulking might need to be removed before a fresh layer can be put on. It is important to keep in mind that when it comes to uPVC window repairs you should not be tempted to apply too much caulk’ as this will only make the area harder to clean and could decrease the efficiency of your energy usage.
It is crucial to make sure that any drainage holes are clear of debris and that the sill pan is placed in a way that allows it to drain away from the window. In more serious situations, you may need to think about replacing the window.
Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This fungus thrives in damp conditions and can spread quickly throughout the house.
It is also important to remember that if the leakage originates from the glass of your double-glazed windows, it’s more likely to be a problem with the glass seal rather than the frame or sagging. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be the reason for the reason that your uPVC window is difficult to open or it blows open with a breeze. Anyone who is a skilled DIYer can fix these in a matter of minutes.
Like any mechanical component hinges will be damaged over time. Changing a window hinge is an easy procedure, but it is easier when you have a person to help you hold the frame in place.
Verify that the uPVC hinges are closed and open in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.
Window hinges that aren’t working properly can be caused by incorrectly opening the window in a particular manner or because of inadequate installation at the factory. Sending us a picture via our website will often resolve the problem. We are always happy to give suggestions.
It is also important to lubricate the hinges on a regular basis. Applying a light engineering lubricant to the hinges is a good method of doing this. We suggest using a lubricant that does not contain solvents, like 3-in-1 Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also reduce the risk of a window sticking and prevent corrosion. This must be done at a minimum once a year. WD40 and other solvent based oils are not recommended because they could damage parts of your uPVC window.
5. Draughts
Draughts in windows made of upvc can be caused by a few different things. First, the hinges because of wear and tear, may become displaced, which can cause an opening to appear between the sash and the frame. They can be fixed by giving them a good clean, but if they are beyond repair it could be necessary to have them re-aligned or replaced. The second is the interlock, which is located on the hinge of the window and can also be misaligned, and again it’s possible to just give them a good clean, but in certain cases, it may be necessary to have these replaced.
The seals may wear out or get damaged over time, allowing air to escape. Replacing these with high-quality weatherstripping can help keep draughts at bay. Another alternative is to replace the upvc window with low-emissivity glass. this will help in regulating indoor temperatures and will reduce the possibility of draughts.
Lastly, one of the most effective ways to reduce draughts is by using a draught excluder, these are typically made of fabric that are filled with some type of filler. They can be put on the top of your windowsill. They will keep your home warm by blocking out cold air.
The windows made of upvc can remain a great source of insulation and security in your home by performing regular maintenance and repairs. However, it is important to recognize that all windows have a lifespan and they may reach the point when it’s more efficient to replace them than fix them. So, if you are having issues with your upvc windows, it’s best to seek professional assistance as soon as possible.