Double Glazed Window Repair
It’s worth looking over the warranty that comes with most double-glazed windows. It usually covers any problems with window hardware, such as hinges and locking mechanisms, in the first ten years.
Mist between the glass windows is usually caused by a break in the seal and must be fixed quickly to prevent damp or mould developing in your property.
Condensation Between the Windows
If condensation appears between your windows, it is an indication that the seal holding in the gas insulating the windows has failed. This is a serious problem that must be dealt with promptly, especially in winter, when humidity levels are at their highest. It could also cause damage to sills, sealant and mould.
Double-glazed windows should not have condensation between the panes. However, it is not uncommon to have extreme humidity or a cold snap to trigger this issue. This issue is usually resolved without the need to replace an entire window. A professional can drill tiny holes into the window and then spray a special cleaning solution inside. The moisture is then removed from the window and an anti-fogger device can be added to prevent further accumulation of moisture in the future.
Condensation may also occur between windows due to air leakage, or other causes outside the window. In this scenario it could take longer for the condensation in the window to build up as the air must be warm enough to vaporise the water molecules. In these situations, it is better to replace double-glazed windows than attempt to repair upvc windows the sealed units.
A double-glazed glass window is comprised of two or more pieces of tempered insulated glass that are joined by a metal framework. The gap between the two of the window is filled with a non-toxic insulating gas like argon or krypton, and then sealed. The seal is responsible for stopping the gas that is insulating from escape and also preventing air and moisture from entering through the gap.
As windows get older, the seals weaken and allow moisture to enter the gap between the glass panes. It is important to know the signs of leaks in the seals because it indicates that the double glazing is no longer functioning as well as it used to. This can result in poor energy efficiency, increased heating bills, damaged property, and the possibility of condensation between the windows.
Mist
If you see condensation on the outside of your windows, this is normal and means that your double glazing is functioning properly and retaining the heat inside your home. The condensation forms because the outside air is more warm than the glass and it reaches its dew point before the window. This is among the many advantages of having high quality double glazing.
If you see condensation on the inside of the window, it could be a sign of a ventilation issue in your home. The excess moisture won’t go anywhere else and ends in the carpet, window furniture, and other areas of your home. This can be avoided by having it examined by a professional and ensuring that there is plenty of fresh air in the house.
Another reason why you may see mist on your double-glazed window is that the seal between the two panes is breaking down. This could be due wear and wear or chemical cleaning solutions being used. The best option is to fix the windows as soon as you can.
The professional repair of your windows will ensure they remain watertight and free from fogging, condensation and misting. It is also less expensive than replacing the windows, and you will save money on your energy bills.
A FENSA certified window installer can provide you with a quote for the repair or replacement of your double glazed windows. Upgrade your old windows to A-rated energy-efficient ones if they are very old.
It is a very good idea to keep copies of any warranties or agreements with your window fitters. It can be helpful in the event that you have any future problems with your windows. You can reach out to your window fitters and resolve the problem. This is a better alternative to simply ignoring the problems, which will only get worse and may lead to other issues in your home.
Difficulty to Open or Close
Double-glazed windows become difficult to open and close it’s not just an inconvenience but it could also result in increased energy bills due to loss of heat and drafts. It can also be a security problem, particularly when the locks aren’t functioning correctly. You should fix any double-glazed doors and windows as soon as you can.
If you’re unable to open your windows and have tried the simplest of fixes like using a screwdriver in order to break it open or rubbing the frame using a sharp object, then the problem might be more serious. The window could have moved and needs to be reset or there could be a gap between glass and frames. In either case you should consult a double-glazing repair specialist to ensure the repairs are done correctly and to prevent further problems.
It isn’t uncommon for UPVC window handles and lock mechanisms to become stuck or hard to operate, especially when they are old and worn. This is due to an accumulation of dirt or grease within the handle. It can be resolved by cleaning it using a upvc window repairs cleaner. If this does not work, you could try tapping the upvc windows repair with a screwdriver. Be careful not to scratch the handle or window handle mechanism.
If this doesn’t solve the problem, the window will need to be replaced because the hinges may not be in the correct position or the locking mechanism could be damaged. In this situation, seek out a professional UPVC window repair expert.
David The Window Wizard is a specialist in double-glazed door and window repairs, including repairing a double-glazed window that has been shut or jammed. He has extensive experience with changing old window mechanisms to modern ones and often can save you the expense of replacing the entire window. Contact us today for more details or a no-cost quote.
Warping
Double glazed windows are often an excellent option to save energy in the home. They are made up of two separate panes that have a spacer, or dense gas in between them. This creates a seal which keeps cold air out and warm within. However in time, the windows may become damaged or broken and require repair. Most repairs can be done without the need to replace the entire window.
A common issue that double-glazed windows face is warping. This happens when windows begin to bow, bend or twist, which can affect the strength of the window and its ability to insulate. Double-glazed windows should be properly installed and maintained to avoid this issue.
If your double glazed windows are starting to swell, it’s crucial to get in touch with a specialist immediately to help prevent the situation from worsening. They can inspect your windows and determine the root cause of the warping. They will then use specific tools to correct the problem and ensure that your windows are completely sealed again.
The most common cause of this issue is the presence of water vapour in the windows which can get accumulated over time. This can be caused various factors, such as humidity, weather conditions and temperature changes. To resolve this issue the expert will make tiny holes in the glass to let out the moisture. The specialist will use a cleaning agent on the glass to clean it, then apply sealant.
If windows aren’t being opened or closed, this could be an indication of a break in the mechanism or hinges. Before calling a professional to fix the issue, it’s worth lubricating these parts. This can usually fix the issue and decrease the need for replacements. However, if your windows are very old or are not providing the insulation you’d like to have, it is often better to replace them.